Install skyBlip from your browser
A computer, Chrome or Edge, a USB-C cable. Briefing does the rest.
Four steps
-
Plug in
The device, over USB-C, into your computer.
-
Install
Click Install in Briefing.
-
Connect
Over Bluetooth, when Briefing asks.
-
Fly
The first steps guide shows you the essentials.
Good to know
A new Go activates in Briefing, with no account. Bravo needs no activation.
For a Tango, install both devices, then pair them in Briefing.
Already on skyBlip? Connect it in Briefing for settings and updates.
If you get stuck
The device doesn’t show up
Turn it on and try a USB-C cable that carries data. Use Chrome or Edge on a computer for guided USB installation. If you can’t use it, copy the software by hand.
Install the software by hand
Download the .uf2 file for your device from the skyBlip releases page.
- Go or Go+: Plug in the device and quickly press RESET twice. It’s near the top on the left side. Copy the Go file to the TECHOBOOT drive. For a new Go, activate it over Bluetooth in Chrome or Edge on a computer or Android. Follow the request on Go’s screen.
- Bravo: Unplug the device. Hold its button down as you plug it back in. Release it when the light turns white. Copy the skyBlip Bravo file to the X1 drive.
Your own transponder shows up as traffic
On the ground, set your transponder to ALT. Bravo can suggest its address for Mode S or ADS-B. Look in Briefing for a Bravo on its own, or on Go’s screen for a Tango. Check that it’s your aircraft before accepting. If you already know the address, enter it under "ADS-B address". If you don’t have a transponder, leave it blank.
Still stuck? Write to us at contact@skyblip.eu or on GitHub.