skyBlıp Briefing
Menu

Traffic comparison · a SoftRF Retro Mk II over USB beside a skyBlip Bravo over Bluetooth

SoftRF Retro Mk II over USB serial

idle

skyBlip Bravo over Bluetooth

idle

Chart

-
The chart centres on the receiver that has a fix, and on the saved area before that. Save the area before the flight, and open the page before takeoff: tiles come from IGN's Géoplateforme and stay in this browser, the page does not. Retro Bravo draw the same aircraft joined by a dashed line, with the height above us in hundreds of feet. Pick one to compare it.

Selected aircraft

Pick an aircraft on the chart or in the table below.

Aircraft

-

Address Callsign Heard by First Retro Bravo
Age, sDist, kmRel, ftListed DropsNew/minRSSI Age, sDist, kmRel, ftListed DropsNew/minRSSI
Listed is the share of the seconds either receiver listed the aircraft, and a drop a gap of more than 3 s. New/min counts new positions, which only GDL 90 tells apart: NMEA repeats or dead-reckons a target between messages. RSSI shows when a receiver's $PFLAA carries one: SoftRF on the Retro's STM32 sends none, in GDL 90 or NMEA. Distances and heights come from the Bravo's fix and pressure altitude, and from the Retro's own when the Bravo has none.

Retro: every attribute decoded

Bravo: every attribute decoded

Why the two lists differ

The Retro speaks GDL 90 by default and the Bravo FLARM NMEA, so each list shows its protocol's fields. GDL 90 sends an absolute position, the pressure altitude, the position's integrity and accuracy (NIC, NACp) and the ADS-B emitter category. $PFLAA sends a position relative to the receiver's own fix, a FLARM aircraft type, and on a skyBlip the source. Set the Retro to NMEA to read $PFLAA on both sides, without the Retro's RSSI. SoftRF also leaves out of GDL 90 an aircraft farther than 25.5 km while the Retro has its own fix, out of NMEA one farther than 75.5 km, and out of both one silent for 5 s. The Bravo forgets an airborne aircraft after 6 s of silence and one on the ground after 60 s.

Log

-
Every sentence and frame both receivers sent, one JSON line each: the time it arrived, the receiver, the raw line or frame, and what it decoded to.