[Guides](https://skyblip.eu/guides.md)

# In sight, and held fast.

A clamp on the glareshield, a ball joint and a quick release. We ordered these parts and tested them.

## skyBlip Go

| Part | Where to find it | Price |
| --- | --- | --- |
| Disc | [Flat 1/4″ disc](https://www.aliexpress.com/item/1005008735044863.html), variant Type A, Ver.2, with an adhesive back | €5.89 |
| Screws | [M3 ultra-thin wafer head screws](https://www.aliexpress.com/item/1005002281189492.html), M3 x 6 and M3 x 8 | — |
| Quick release, male | QS-1 plate, in the [XILETU quick release kit](https://s.click.aliexpress.com/e/_c4rEgYRR), variant Q-1 | €3.39 |
| Quick release, female | QD-1 base, in the same kit | — |
| Ball socket | [17 mm ball socket with a locking ring](https://s.click.aliexpress.com/e/_c3181RVr) | €1.02 |
| Ball | [Aluminium 17 mm ball on a 1/4″ screw](https://www.aliexpress.com/item/1005007754077062.html), variant Ball 17mm | €3.29 |
| Clamp | [Andoer crab clamp](https://s.click.aliexpress.com/e/_c2xJTaW9), metal, 1/4″ and 3/8″ holes | €7.79 |

1. 
    ### Drill the disc.

    Drill two M3 holes in the disc, 14 mm either side of its centre, clear of the central insert.

2. 
    ### Fix it to the Go.

    Press the disc on the back of the Go and drive the two screws. Pick M3 x 6 or M3 x 8 so the thread that enters the Go, the length less the disc, suits it.

3. 
    ### Assemble.

    Screw the male plate into the disc, the female base onto the socket, and the ball into the clamp. Close the clamp on the glareshield, press the socket onto the ball, click the Go in, aim it and tighten the ring.

## skyBlip Go+

| Part | Where to find it | Price |
| --- | --- | --- |
| Quick release, male | QS-1 plate, in the [XILETU quick release kit](https://s.click.aliexpress.com/e/_c4rEgYRR), variant Q-1 | €3.39 |
| Quick release, female | QD-1 base, in the same kit | — |
| Ball socket | [17 mm ball socket with a locking ring](https://s.click.aliexpress.com/e/_c3181RVr) | €1.02 |
| Ball | [Aluminium 17 mm ball on a 1/4″ screw](https://www.aliexpress.com/item/1005007754077062.html), variant Ball 17mm | €3.29 |
| Clamp | [Andoer crab clamp](https://s.click.aliexpress.com/e/_c2xJTaW9), metal, 1/4″ and 3/8″ holes | €7.79 |

1. 
    ### Screw in the plate.

    Screw the male plate into the 1/4″ insert on the back of the Go+.

2. 
    ### Assemble.

    Screw the female base onto the socket, and the ball into the clamp. Close the clamp on the glareshield, press the socket onto the ball, click the Go+ in, aim it and tighten the ring.

Prices seen on AliExpress between 3 October and 18 November 2026. The quick release, ball socket and clamp links are affiliate links: skyBlip earns a commission. Your price does not change. A Go and a Go+ share one clamp with a [spare QS-1 plate](https://s.click.aliexpress.com/e/_c4rEgYRR), €3.09.

## Place the antenna

Aim the Go or Go+ so its antenna points straight up. ADS-L antennas are vertically polarised, and a tilted antenna hears less and is heard less. Keep it clear of metal, carbon fibre and your body, and give it a view of the sky through the canopy or the windscreen, so it reaches every direction.

## skyBlip Bravo

Hang Bravo by the leather lanyard in its box, near the canopy or the windscreen, with a view of the sky.

Want to try it now, or get one?

[Try it online](https://skyblip.eu/try.md) the software in your browser

[Get one](https://skyblip.eu/buy.md) a Go from €68, no subscription
