# Install skyBlip from your browser

A computer, Chrome or Edge, a USB-C cable. Briefing does the rest.

## Four steps

1. 
    ### Plug in

    The device, over USB-C, into your computer.

2. 
    ### Install

    Click Install in Briefing.

3. 
    ### Connect

    Over Bluetooth, when Briefing asks.

4. 
    ### Fly

    [The first steps guide](https://skyblip.eu/guides.md) shows you the essentials.

[Install in Briefing](https://skyblip.eu/briefing/setup?locale=en)

## Good to know

A new Go activates in Briefing, with no account. Bravo needs no activation.

For a Tango, install both devices, then pair them in [Briefing](https://skyblip.eu/briefing?locale=en).

Already on skyBlip? [Connect it in Briefing](https://skyblip.eu/briefing?locale=en) for settings and updates.

## If you get stuck

### The device doesn’t show up

Turn it on and try a USB-C cable that carries data. Use Chrome or Edge on a computer for guided USB installation. If you can’t use it, copy the software by hand.

### Install the software by hand

Download the `.uf2` file for your device from the [skyBlip releases page](https://github.com/fcatuhe/skyblip/releases).

- **Go or Go+:** Plug in the device and quickly press RESET twice. It’s near the top on the left side. Copy the Go file to the **TECHOBOOT** drive. For a new Go, [activate it over Bluetooth](https://skyblip.eu/briefing/activate?locale=en) in Chrome or Edge on a computer or Android. Follow the request on Go’s screen.
- **Bravo:** Unplug the device. Hold its button down as you plug it back in. Release it when the light turns white. Copy the skyBlip Bravo file to the **X1** drive.

### Your own transponder shows up as traffic

On the ground, set your transponder to ALT. Bravo can suggest its address for Mode S or ADS-B. Look in Briefing for a Bravo on its own, or on Go’s screen for a Tango. Check that it’s your aircraft before accepting. If you already know the address, enter it under "ADS-B address". If you don’t have a transponder, leave it blank.

Still stuck? Write to us at [contact@skyblip.eu](mailto:contact@skyblip.eu) or on [GitHub](https://github.com/fcatuhe/skyblip/issues).
